Hi DTube Woodwork Fans,

Welcome back to the final part of the oak door and side window.

The door, frame and window have had a final sand and are now ready for the wax oil finish.

I use a brush to apply the first coat so that I can get into the corners and so that I can get a good layer of finish on the bare oak.

Once it has had time to dry I give everything a rub down with 240 grit sand paper and the final coat will be done after installation.

I will have to wait for the glass and metal work to be made and then I will be able to do all the finishing touches.

I highly recommend that you make DTube videos to show us any woodworking projects you are working on.

If you have any technical questions give me a shout on the woodworking discord channel.

Disclaimer:

Always adopt safe working practices. The way I do things are for illustrative purposes only and may not work for you so make sure you have all the relevant safety information and protective safety wear.
 
 

 
 

 
 
We have started a woodworking community here on steemit and would welcome you.

Thanks for viewing,

Onwards and upwards,

@jist