The water we drink is the life blood of our body so it is absolutely imperative that we develop a system in our home which not only filters our drinking water but also re-energizes it. In this post i will describe my own system which has evolved over the course of years and demonstrate how i made the most recent addition, a machine to inform my structured water with frequencies so that my body might enjoy the benefits directly. As opposed to the effect created by listening to the frequencies, which i believe is arguably weaker.
Vortex & magnetic technology combined
Viktor Schauberger taught us that water doesn't like the way us humans treat it and by the time it reaches our homes it is not dead, but completely traumatized, permitting just a fraction of its true potential to work its magic in our bodies. Water likes to dance and play as it makes its way from the mountains to the sea, experiencing not the long straight pipes through which we pump it but the multiple vortexes created by meandering movements and rocks in the riverbed.
It is for this reason i bought a Schauberger water funnel with a magnetic array to effectively erase the memory of the water & re-structure it, in preparation for the final stage during which frequencies are added.
The water flows past the south/negative side of these 54x5mm neodymium cube magnets while in a vortex state.
The designer of this product (OmegaZZ) has taken the magnetic bowl array idea from David LaPoint and the groundbreaking Primer Cube, a rotating magnetic bowl which is said to work wonders on the body. OmegaZZ even shows you how to build your own on a budget, creating a very powerful electromagnetic field, though i would personally be cautious about diverting from LaPoint's original open source design which has been tried and tested without adverse effects.
https://youtu.be/_mkZmqycIHI
So OmegaZZ has combined LaPoint's static magnetic bowl array with Schaugerger's vortex funnel and i absolutely love it.
Our old system involved spinning the water between two plastic bottles with a magnetic field in the middle and while i think it was very effective because you can spin clockwise and counter clockwise, it simply took too long.
Plus the magnetic field would have been weaker with just four magnets. Even if i had squeezed in eight magnets here it would be weaker than the 54 magnet bowl array.
For a while i used this system which flowed the water multiple times past the north and south side of a much stronger magnet, but then i learned that polarity matters.
So next i tried strip magnets with only their south side exposed to the exit pipe of the filtered water.
Bit like i am now doing with my hose connection between the canal and my garden.
This basic contraption by the way is exactly the same as devices like the Plant Surge growth booster.
Plenty of testimonials back up the effectiveness of this device.
https://youtu.be/uqSceoNLNzo
Even the great Charles Dowding says "What I’ve noticed is that my winter salads were noticeably stronger in the colder weather and I am pretty confident that Plantsurge is contributing to this, my tomatoes and cucumbers were also amazing." source
So there you have it. Magnetic fields boost water.
If you're going to put magnets on your hose pipe (or on your filtered water out-pipe) just make sure the south side of the magnets face the water. Polarity can be confirmed with a compass because the side which normally points north will be attracted to the south side of the magnet, also known as the negative side.
The new system
Our new more efficient system now takes the tap water through this Zero Water filter (with iron pyramid on top to extend lifespan of filter) before entering the magnetic vortex funnel and finally out into the blue glass bottle at the bottom.
You can't see the magnets but they are all around the base of this bowl where the water is spinning.
OmegaZZ tells us the water spins in this bowl for around 10seconds before leaving, so this is another reason why it is more effective than my previous system.
What we are creating here is clean, structured water but if we want to inform this water with specific frequencies before we drink it, a frequency generator (in this case a phone) and some kind of conductive coil is required.
Or a dedicated spiritual mind! I do want to point out in this moment that humans can add frequencies to their water using intentions/visualisations/prayer/song/tuning-forks/dowsing/sunlight/colour and a great many other more manual techniques but i was simply captivated by this machine and once i understood it, i had to build it. For a cost of around €100 which includes the new amplifier.
The pancake coil
When activated by a live current this simple coil of insulated copper wire produces a torus shaped electromagnetic field, visualized here with iron filings on a perspex sheet.
This video by OmegaZZ helped me see how easy it would be to construct one of these machines myself and i am very grateful for his guidance answering a few questions for me.
https://www.youtube.com/watch?v=fdzsrVdoFJo
OmegaZZ is really into 3D printing and this is great but i don't think it is the best material through which to pass beneficial frequencies. Better i would say if it were an orgonite style resin based plate, packed full of crystals and copper which has been twisted with intention.
Like the Heddeka for example which is known to energize water and was once used by fishermen to keep their fish alive for longer before market day. I made one a few years back for the base of this spiral water holder.
And we now make incredible tasting fig & lemon kefir in it every day!
I have various different styles of resin plates made over the last few years, some of them seen here.
So i selected one and set about creating my pancake coil with 200g of 0.4mm enameled copper and a heart chakra stone at the centre.
The end of the copper wire is taped to the side of the plate so it doesn't get in the way with the winding.
I made a second plate with just resin and glued it on to create a uniform gap all around.
Esteban willingly took the laborious job of winding the copper onto the coil. OmegaZZ tells us we need a winding machine for this but he obviously doesn't have children ;)
It worked better when the copper was suspended like this.
Important to keep it tight while the coil is being created.
At the heart of this machine is an amplifier. Small but strong. I was happy to buy it because we don't have one. It will be used for music (connected to speakers) and for healing (connected to my plate).
Though depending on what kind of music you listen to, those two things are one and the same. As an example, 432Hz based music and Gregorian chanting which utilizes the Solfeggio frequencies benefit your body just by listening. Especially if you are enjoying a live performance in a space with great acoustics.
I will create the frequencies using Z-app on my phone, directly into the amplifier.
Esteban is finished now so he removes the taped piece of copper.
Giving us two pieces of wire which need to be stripped at the ends, removing the enamel.
Luna was busy painting cone bases at the same time. This is what you call a family business!
Here is my finished charging plate with its two ends connected to the amplifier.
I played 528Hz on my phone and it was audible in the coil straight away. Though very faint.
Then i handed the children some small neodymium magnets and had them hold the magnets just off the surface of the coil and the volume of the frequency increased.
If you listen carefully it actually plays the frequency at a different octave when you draw the magnet close to the plate. Which is really quite amazing to me!
If you place the magnets on the coil they will vibrate and move around. This is especially true if you play music through the amplifier which has a beat.
If you put a big neodymium magnet on the plate the sound gets even louder.
Louder still if you suspend the magnet like this.
We are of course utilizing the basic principles of a speaker here with a copper coil and a magnet. Only this is isn't a speaker, it's a plate which has been made with love, on which you can charge not only water but anything you like.
When i put it on the wooden table and played music through it with the magnet on a napkin, the bass was amazing, making the entire table vibrate! Sounded like a booming party in the house next door.
Coming back to the water i put it on the active charging plate and wondered how far out the torus shaped electromagnetic field extended?
We can get a pretty good answer to this question by slowly drawing the magnet in towards the bottle. If the field is there, the sound will increase.
Why does this happen? Well, the EM field is oscillating thanks to the alternating current, so if you draw a permanent magnet into this field it will be alternately attracted and repelled, creating a mechanical movement within the magnet which effectively punches the air around it very quickly, producing the sound.
You can really feel that interaction in your hand and as a tool to see if your machine works, this seems a very effective one.
Even here at the top i can just about hear the sound of the frequency increase when i draw the magnet in toward the bottle, which tells me that every part of this bottle is being affected by the EM field.
I leave the frequency playing into the water for around an hour in the mornings and i must say, it does taste spectacular now.
Am playing 528Hz because OmegaZZ says he tried out many frequencies and found this to be the most effective and flavorsome. Esteban & i can both detect a faint hint of lemon in the water now. And it really feels great in your mouth.
I recently put some tap water in my mouth accidentally and it was beyond disgusting. Not suitable for humans. Don't even use it to brush your teeth!
As for cleaning ourselves if you have the money you can buy a Schaugerger style attachment for your shower head to energize the water before it hits you. The catch is that you need to have decent water pressure for this. Which we don't.
In our modern homes water enters into a healthy vortex state only on its way out, as it goes down the plug hole! So if you want optimum water you simply have to buy or create a device of some kind.
My intention is to make these charging plates available to buy on Etsy along with my cones because when they are not charging water they can be used with a cone on top, taking advantage of their antenna-like capabilities.
Basalt is the main ingredient in these cones and this makes them mildly attractive to magnets. As you can see the magnet sticks (though it does slide down till it hits this spot).
So my thinking is that we can project the beneficial frequencies out even further using this very particular shape and material. Certainly it does seem as if i can hear the audio indication of the field presence quite far away from the base now that the cone is on it.
What else can i tell you?
OmegaZZ has done plant tests and found that basic tap water informed with 528Hz makes plants grow better, so you can be sure all my house plants will also be getting frequency water from now on!
Currently testing out 528Hz on my bread.
Final thoughts
I have been on a magnetic journey of discovery this winter, all of which led me seamlessly to my current water treatment system.
Sabrina gave me this bracelet as a gift and after wearing it for a few days i didn't feel good, so did a bunch of research and learned in a nutshell that polarity and position on the wrist matter greatly. South/negative side must be exposed to the skin and depending on which hand you wear the bracelet, there is a right and a wrong way up to wear it due to the positive and negative meridians in the upper and lower side of our wrists.
A very informative website on this subject can be found here.
So first i checked orientation of all the magnets. As i mentioned they must be south side exposed to the skin and it would seem that many companies making these magnetic bracelets are not aware of this. Or they just don't care?
As you can see, the red end of my compass which normally points north is attracted to the skin side of the magnets, meaning these magnets are correctly positioned.
But the central magnets in the bracelet were also positioned south side exposed to the skin and this is not correct, so i removed them.
It turned out i was also wearing it the wrong way round on my right hand so i switched it and did indeed feel much better.
Just for your reference, the north side of magnets can be useful for the body in certain situations. The basic idea is that the south side of magnets activates/stimulates while the north side deactivates/slows down the affected area. So if you have pain, the north side is useful. Or perhaps for an overactive thyroid problem. Maybe it even works on an overactive mind? I should try!
To demonstrate this principle easily try growing sprouts with a magnet under them and you will see how the south side works much better in forwarding their growth.
Looking further into these magnetic bracelets, which appear to be getting more and more popular today, i found there is no way they can give the claimed "all body healing" when they are such small magnets and only placed on the wrist. They may help with local problems in the wrists and hands but nothing beyond this.
So the bottom line from this little adventure was a confirmation that the south side of magnets is best for boosting the body, water and plants. And also that the magnetic bracelet industry is generally speaking a big scam!
The final point i wanted to draw your attention to is the connection between charging plates, cones and these torus shaped pendants i have been making.
I generally wire them dual phase with two wires moving in opposite directions but they can also be wired single phase which moves the current in one direction, if it were to be wired up to a frequency generator.
The pancake coil produces a torus shaped electromagnetic field which can be seen in cross section here.
Can you see the two 'empty space' cones in there, their apexes meeting in the middle?
This is known as a double cone and according to the ai, "In advanced geometry inversion of a cone can yield a torus, suggesting a deep dual relationship between conical surfaces and toroidal shapes."
So you see there is a connection and that's why i am focused on these three products.
Plus the torus pendants can now be 'charged' with a frequency prior to wearing, making these three items a very powerful and completely unique trio.
Tomorrow Esteban & i are going to re-wire one of these pendants with enameled copper and connect it to my amplifier.
There is much less copper than the pancake coil but this means there will also be less resistance so it could still be an effective way to project out our torus shaped EM field. The magnet will tell us how effective the field is.
If we wire it single phase with a single piece of copper moving in only one direction we should be able to see a magnetic ball moving in circles when placed in a glass on the torus pendant. Which is an amazing trick to observe for adults and children alike!
You can be sure i am not the only one playing this game.
iPyramids have created a solid brand around it and are busy making films to get the word out.
https://www.youtube.com/shorts/d7KuTYQChCU
I really like their products but they seem overpriced when you know how much money i just spent on creating something which produces a very similar effect.
For now there are only a few of us playing in this arena but hopefully this post has peaked your interest enough to get you playing too.
We are still in the early days of a return to that which was once commonly understood by great minds like Tesla and i think there is opportunity here to capitalize whilst simultaneously helping humanity at large move forward in its thinking around EM frequencies and health.
Right, time to try the frequency bread!
Love & Light everyone 🌱
