ESP | ENG DIY: Porta cepillos hecho en foami.🪥 - DIY: Brush holder made of foam.🪥

2023-12-25T22:35:57
clqlhwwu200gt9eszfj2s9cro_20231225_164106_0000.webp/
Feliz noche querida comunidad DIYHub, espero se encuentren bien en esta navidad que la estén pasando excelente junto a su seres queridos, hoy de nuevo me encuentro por acá para compartir este lindo porta cepillo de dientes que realicé.
Realicé un porta cepillo de dientes que pueden colocar en el baño de su hogar, allí se puede colocar la crema de dientes, y además puedes colocar al menos dos cepillos uno dentro de un pequeño compartimiento y otro en la parte externa donde se encuentra el sujetador, a continuación te muestro el paso a paso y los materiales que utilicé.
Materiales:🖌️
✅Caja de cartón.
✅Foami verde escarchado y simple.
✅Foami escarchado marrón.
✅Foami amarillo y dorado.
✅Foami negro.
✅Tijera.
✅Silicón.
✅Pintura blanca.
Paso a paso:
El primer paso es cortar un retazo de cartón de forma alargada, se debe asegurar que los bordes queden iguales, luego de esto vamos a realizar un pequeño compartimiento también de cartón.
Cortamos un retazo de cartón pequeño y dos franjas de cartón que se ubicarán en los laterales del compartimiento, también un pequeño retazo en la parte inferior nos guiamos con la medida del compartimiento.
Luego de tener listo el compartimiento lo forramos con foami marrón escarchado, para la decoración de la base forramos con foami verde tanto escarchado y simple, ya que no me alcanzó para colocar de un solo estilo uni varios retazos.
Luego realicé las flores en forma de girasol, dos de ellas con foami amarillo y una con foami color carne y apliqué marcador amarillo en el centro coloqué un círculo de color marrón, para cada flor realicé las hojas con foami verde y una línea blanca en medio.
Para finalizar con foami negro corte dos pequeñas tira doble y las coloqué para sujetar un cepillo de dientes, en el compartimiento también coloqué dos círculos de color dorado en una de las esquinas y una hoja de color verde 🌿 para decorar. Por último se colocan los adornos en la base y listo nuestro porta cepillo de dientes.
Muchas gracias por visitar mi publicación, nos vemos en una próxima oportunidad.
ENGLISH
Happy night dear DIYHub community, I hope you are well this Christmas and that you are having a great time with your loved ones. Today I am here again to share with you this cute toothbrush holder I made.
I made a toothbrush holder that you can place in the bathroom at home, you can put the toothpaste there, and you can also place at least two brushes, one inside a small compartment and another on the outside where the toothbrush holder is located. Below I show you the step by step and the materials I used.
Materials:🖌️
✅Carton box.
✅Green foam with frost and simple.
✅Foam with brown frost.
✅Yellow and gold foami.
✅Black foam.
✅Scissors.
✅Silicone.
✅White paint.
Step by Step:
The first step is to cut an elongated piece of cardboard, you must make sure that the edges are equal, after this we are going to make a small cardboard compartment.
We cut a small piece of cardboard and two strips of cardboard that will be located on the sides of the compartment, also a small piece at the bottom. We are guided by the measurement of the compartment.
After having the compartment ready, we lined it with frosty brown foam. To decorate the base we lined it with green foam, both frosty and simple, since it had to place pieces of various styles.
Then I made the flowers in the shape of a sunflower, two of them with yellow foam and one with flesh-colored foam and I applied yellow marker in the center, I placed a brown circle, for each flower I made the leaves with green foam. and a white line in the middle.
To finish with black foam, I cut two small double strips and placed them to hold a toothbrush. In the compartment I also placed two gold circles in one of the corners and a green leaf 🌿 to decorate. Finally, the decorations are placed on the base and our toothbrush holder is ready.
Thank you very much for visiting my post, until next time.
Contenido original. - original content.
Los separadores y banner fueron realizados en Canva. - The dividers and banner were made in Canva.
Las fotografias son tomadas con mi teléfono Redmi Note 11s y editadas en PicsArt - The photographs are taken with my Redmi Note 11s phone and edited in PicsArt.
Traducción de: Google traductor - Translation of: Google translator.

For the best experience view this post on Liketu
237
14
18.57
14 Replies